If you wonder which table saw would be the best choice for your woodcutting needs you will definitely have to check for some parameters and highlight them according to the projects in hand. Before buying a table saw and table saw tools always check out the accuracy, motor system and portability and thus you will know which one would be fit for your task. If you are going to carry the saw with you and use in multiple workplaces it should be portable and light enough to be carried with. On the other hand if you are going to keep the saw at your shop, whether it's a 10 inch table saw or 12", portability won't be of that importance. Also consider the fence and the table setup, the blade and motor mounting system and the table saw tools coming with the saw itself.

Makita Saw Blade

Table and fence setup:

Makita Saw Blade

It's imperative to setup the fence and the table properly in order to get a clear cut effectively. When you need a wider cut but at the same an accurate one fence and rails should be used that will extend beyond the table. DeWalt model DW744 has a fence and rail with expandable table which supports up to 24 ½" rip cut. The cogwheel and tooth track system allows the table to expand and the fence to be set and locked at the end of the rail. There are many popular brands out there among them Bosch table saw and Roybi table saws should be mentioned. Bosch and Ridgid are portable that comes with expandable table adjustable to increase or decrease the width of the cut. While Bosch table saws use aluminum rails sturdy enough to withstand pressure of plywood, Ridgids are even stronger and they are more frequently used in Home Depot. BT3000SX is one of the most powerful Roybi table saws that are capable of producing cuts 33 inches wide. All the portable table saws share some common features such as expendable fence, quick change inserts, sliding miter table and considerably light weight.

The other two popular portables are the Hitachi saws and Jet products. Jet table saws are quite heavy especially due to the heavy rot iron extensions. But they are good at ripping plywood in halves. On the other hand Hitachi portable table saws, like Hitachi C10RA2 has aluminum made table body and steeled jacket making it too heavy to move even without the stands.

There are lighter table says as well that comes at cheaper than the heavy Hitachi C10RA2 or the similar. Delta, Skil and Powermatic produces those light weight saws. Powermatic has comparatively larger brushed aluminum table body with 2 extensions and therefore they are heavier and less mobile than Delta or Skil saws. Delta and Skill saws however come with cam-locking fences and aluminum tables.

Motors and Mounting:

An important feature for portable table saws is the way the motor and the blades are mounted.
One will have to mount the blades and the motor on the bigger portable table saws with guide rods and use symmetrical tracks to lower or raise the blade. Following these clear and quality cuts are ensured by reducing the vibration of the motor and blade. Again, the vibration may come back as soon as one adjusts angles. Ridgid and Makiti portable saws use tooth and cog to adjust the motor and they use the adjusters at their higher adjuster wheel thus improving the motor carriage. Meanwhile Hitachi and Ryobi portable saws use pull/ push hand wheel to adjust. Among them Hitachi have plastic track and gears and for the reason their durability isn't beyond questioning.
The best blade and motor mount system will be found with Jet portable table saws. It uses two screws, one for adjusting the angle and the other for height, but due to that extra hand wheel Jet table saws are a bit heavier.

Accessories:

The main concerns of the accessories are to make the more use of your saws more convenient and safe while adding to their portability. Makita's come with an accessory stand that is used to increase the width of the cut. Although the stand makes the saw bulky, with the help of the stand a 49 inches wide cut can be produced. Roybi table saws include portable steel made cart with extension tables in their accessories. Extension tables are more like shopping carts used to shop around.

Among the most common accessories are the stands with bolts and the legs. Many brands like Powermatic, Ridgid, DeWalt and Bosch have those accessories which affect their portability negatively. However, DeWalt, Bosch and RidGid table saws have the most easily adjustable stands and they are easy to setup and move. Stands used in Bosch Table saws can pop open and fold flat with just one move. Ridgod portable table saws have extra portability due to the hand truck. The stand folds and fits to the truck as well as the saw itself and thus can be carried away with ease.

In general:

Considering the accessories and the mobility the best brand names are be RidGid, Dewalt and Bosch. The main features that contributed to their performance are effective blade and motor mounting system, with provision to produce wider cuts, useful accessories and portability. Thus they are also good for working at different work places. As long as the price is concerned Makita and Hitachi can be considered as they come much cheaper than the above brands but still able to give quality cuts. The table saw tools you re going to need will largely depend on the type of your projects. If you require fence table saws for professional purposes and some 10 inches work every now and then you will more likely be investing in Bosch or something of its kind. For occasional wood workers who don't need to travel much and don't need top notch precision the least expensive fence table saws would be the perfect choice. Depending on the wood workers needs each has its plus and minus points.

Visit us for more info on table saws.

3 Features For the Best Portable Table Saws

Makita Saw Blade